Specifications:

Accessories

Power Cable: 1m

Video Cable: 5m

Screws/Nuts(for bracket mount)

Description:

MA0468 this car specific camera for TOYOTA Crown with smart size design is installed for replacing the original license plate lamp, it is easy and makes the camera is original OEM style. The camera is with 3^rd generation high definition CMOS sensor, that makes the camera picture more sharpness and colorful image. And camera with the distance scale line for drivers’ reference, and with wide viewing angle & night vision& water proof. 

Water Proof:

With IP68 water proof, and weather resistant, that makes you can use in any weather conditions and keep the quality.

Installation Location:

1. First, take down the car battery’s power supply line and keep it away from electrode avoid cause an accident.
2. Take down the license plate lamp.
3. Get the camera’s lines across the license plate lamp original position.
4. Fix the camera with the fastener or screw.
5. Take the camera’s power line connect with the backup light’s power line.
6. Take the camera’s signal line connect with one side of the signal extension line.
7. Take the other side of the signal extension line connect with the monitor’s input.
8. Check if all lines are correct connected and arranged.
9. Recover the car battery’s using then start the car the hang reverse gear, the reverse image will appear on the monitor’s screen.
10. Cover the car trunk.

The Matters Needing Attention:

1. Can’t use the electric vehicle power supply connect with battery power supply in order to avoid power supply is unstable.
2. Must not rely on the car rearview camera , it is a auxiliary tool. We must be carefully when reversing.

Applications:

For TOYOTA Crown.

Competitive Advantage:

High-definition, Night Vision, Waterproof, Colorful CMOS sensor

 Warranty: 12 months